SEARCH Part # or Keyword:
Enter a keyword or part number in the box below:

* Part numbers for custom tooling are not searchable on our online catalog

CNC Heavy Duty Live Centers

View Catalog Page

Live Center Applications

Riten CNC heavy duty live centers are designed specifically for those applications requiring load carrying capabilities that exceed that of typical live centers. Applications involving part weights ranging from 3,000 to 14,000 pounds require larger live centers. Part weights in excess of this require Extra Heavy Duty Live Centers or Super Duty Live Centers. Extreme loads and heavy stock removal rates are typical when turning rolls, shafts and forgings. Roll manufacturers, manufacturers of power generation components and large shaft and cylinder manufacturers all rely on CNC heavy duty live centers for their work holding requirements. These live centers are used to counter the high thrust loads encountered when face driving.


Live Center Availability

CNC heavy duty live centers are available from stock in Morse tapers. Standard point and tracer configurations are available from stock. Custom configurations can be designed using our on-line design tool or by discussing your application with one of our product specialists.

Live Center Technical Specifications

The CNC Heavy Duty live center utilizes the same large bore, matched angular contact bearings as Heavy Duty live centers. RPM capabilities are increased in the CNC Heavy Duty live centers in comparison to the Heavy Duty live centers. Our large inventory of precision bearings are graded and matched for size to insure the proper bearing fit. Both the front and rear bearing bores are ground in one operation through a process unique to Riten Industries. As a result, bearing bores are both concentric and coaxial with the Morse taper. Proper bearing alignment and fit are key to providing an accurate live center capable of holding extreme weights.

The shell is manufactured from low carbon steel and case hardened, while the spindle is manufactured from tool steel and through hardened to provide the maximum strength and durability needed in a live center spindle.

Live Center Repair

Standard CNC heavy duty live centers will be rebuilt to “Like New” condition for 40% of the cost of a new tool. This is a total reconditioning of the entire live center. The shell is inspected for damage and the taper shank is reground as needed. The bearings, seals and spindle are replaced with new components and the live center is returned to its original accuracy. Every repair receives the identical factory warranty as that of a new live center.

In the unlikely event that your live center is beyond repair, Riten offers a preferred customer trade-in allowance of up to 35% on the purchase of an equivalent live center. Every Riten live center, no matter its condition, is eligible for trade-in. Repairs can be returned through you local Riten distributor or send direct to the factory.

© 2022 Riten Industries, Inc. All Rights Reserved | Privacy Policy | Terms of Use